Overview
Dill 1025-U Universal TPMS Cradle
Dill Universal TPMS Cradle for adapting a TPMS sensor to fit custom wheels. If the sensor does not fit your custom wheel, try banding it directly to the wheel. First unscrew the nut from the sensor, then bend the top of the universal cradle. Place the sensor through the hole and tighten the nut. The sensor may not be flush with the cradle. Then slide the universal band (Part #1194) through the cradle to band the sensor to the wheel, and follow band instructions for proper installation. Finally check your diagnostic tool to ensure the sensor is functioning and the vehicle is receiving the signal. Actual sensor not included with 1025-U.