Coats RC 45 Electric Rim Clamp Tire Changer (115V)- Compact Swing Arm

Coats RC 45 Electric Rim Clamp Tire Changer (115V)

The Coats RC 45 Electric is a compact rim clamp tire changer for aftermarket shops with limited space. It runs on standard 115V power, so no extra outlet is required. It handles alloy and steel car and light truck wheels from 6" to 24" (external), tires up to 50" in diameter, and rims up to 10.5" wide. Coats designs and builds the RC 45 in La Vergne, Tennessee. It has a manual swing arm, a Duckhead mount/demount tool, and built-in bead sealing jets for tabletop inflation.

Key Features:

• 115V electric drive: 1.5 HP motor, 60 Hz, 15 amp.
• Rim Clamp® design: Four air-cylinder-operated clamps hold the wheel securely by the rim.
• Manual swing arm: Technicians can move the tool head as needed for better access.
• Duckhead® mount/demount tool: Comes standard. It rests on the rim to guide the bead off during demounting and back on during mounting.
• Built-in bead sealing jets: Tabletop inflation with a 3.4-gallon bead seating system.
• Foot control bead loosener: Works on tires up to 10.5" wide.
• Compact footprint: Designed for shops with tight space.

Specifications:

Frequently Asked Questions:

What power does the Coats RC 45 Electric require?
It runs on standard 115V power with a 1.5 HP, 60 Hz, 15 amp electric motor, so no extra outlet is required.

What size tires does the Coats RC 45 handle?
The RC 45 handles 6"–24" external rim diameters, rims up to 10.5" wide, and tires up to 50" in diameter.

What is the difference between the Coats RC 45 and RC 55?
Both are compact swing arm rim clamp tire changers with the same rim, tire, and clamping specs. The RC 55 adds a Robo-Arm helper system for extra help with run-flat and low-profile tires. The RC 45 has no helper device.

Is the Coats RC 45 a good fit for small shops?
Yes. Coats designed the RC 45 with a compact 35"W x 44"D footprint and standard 115V power for aftermarket shops with tight service bays.

What accessories come with the RC 45?
The RC 45 comes with two Duckhead® mount/demount tool inserts (#8182961). The Duckhead mount/demount tool comes standard.

Where is the Coats RC 45 made?
RC tire changers are designed and built in La Vergne, Tennessee, where Coats is headquartered.

Model shown may differ from current production and may include optional features. Contact your local rep or call us at 1-800-621-1563 to verify specifications and included accessories