Hunter RX10KIS 10,000 lb Surface-Mount Scissor Alignment Lift with Inflation Station

Item #: 255RX10KIS
Hunter RX10KIS 10,000 lb Surface-Mount Scissor Alignment Lift with Inflation Station
The Hunter RX10KIS is a 10,000 lb surface-mount scissor alignment lift with Hunter's patented Inflation Station, two 6,000 lb swing air jacks, 24-inch runways, stainless steel turnplates, and built-in slip plates.

Hunter RX10KIS Surface-Mount Scissor Alignment Lift with Inflation Station

The Hunter RX10KIS is a 10,000 lb capacity surface-mount scissor alignment lift equipped with Hunter's patented Inflation Station. It is part of Hunter's RX scissor lift family, designed for maximum productivity in minimum space. Open access at the front and rear, 24-inch runways, and two standard swing air jacks make it well suited to alignment work on passenger cars, SUVs, and light trucks.

Inflation Station

  • Inflates all four tires at the same time, automatically
  • Records starting and final tire pressures automatically
  • Recoiling hoses keep the work area clear

Fully Integrated Alignment (FIA)

When paired with a Hunter alignment system, the RX10KIS becomes part of Hunter's Fully Integrated Alignment workflow. The WinAlign® console guides the technician step by step and communicates directly with the lift to set tire pressure. Hunter says a synchronized aligner and alignment rack completes alignments up to 60% faster.

Standard equipment and features

  • Two 6,000 lb swing air jacks for lifting vehicles off the runways
  • 24-inch extra-wide runways accept vehicles up to 92 inches wide, including full-size pickups, SUVs, minivans, and delivery vans
  • Stainless steel turnplates for long-lasting, accurate alignments
  • Built-in rear slip plates for four-wheel alignments from 88 to 158 inches
  • Two movable worksteps that lock into several positions
  • Air line kit supplying air to the jacks and auxiliary ports
  • Louvered approach ramps for high traction, which Hunter rates better than diamond plate or abrasive finishes
  • Open front and rear access under the vehicle

Safety and speed

  • Fast descent cuts lowering time by 50%, with a soft landing
  • Sixteen-position fine-mesh locks keep the lift level and secure
  • Electronic level control keeps the runways level at all times and shuts the lift down if it hits an obstruction
  • Hydraulic velocity safety fuses shut down instantly if a hose fails

Options

  • AlignLights turn on when the rack is raised and off when it's lowered
  • Harsh Duty package for regions with heavy road salt and brine, available only on IS and PS models. It adds zinc-rich primer, stainless steel slipplate tops, epoxy-sealed joints, polymer slipplate balls and retainers, and a powder-coated threshold cover.

Warranty and manufacturing

  • Hunter's 3-year warranty: three years on parts, six months on labor
  • Engineered in the United States and manufactured in Durant, Mississippi

Specifications:

Specification RX10K Surface-Mount
Max vehicle weight 10,000 lbs (4500 kg)
Max wheelbase, general service 171 in (4343 mm)
Max wheelbase, two-wheel alignment 166 in (4216 mm)
Max wheelbase, four-wheel alignment 158 in (4013 mm)
Min four-wheel alignment wheelbase 88 in (2235 mm)
Alignment height All lock positions
Lifting speed 1 speed, 55 seconds
Lowering speed 2 speed, 25 seconds
Length 241.25 in (6128 mm)
Elevated length 217.25 in (5518 mm)
Outside width 88.5 in (2248 mm)
Inside width 40 in (1016 mm)
Runway width 24 in
Power requirements 208–230 VAC, single phase, 26 amp
Air supply 130–150 psi (9–10.3 bar)
Minimum concrete 3 in (76 mm) thick, 3000 psi (20,700 kPa) rating
Maximum floor slope 2 in (51 mm) over 126 in (3200 mm)

Frequently Asked Questions:

What is the Hunter RX10KIS?
It is a 10,000 lb capacity surface-mount scissor alignment lift from Hunter Engineering, equipped with Hunter's patented Inflation Station.

What does the Inflation Station do?
It inflates all four tires at once and records starting and final pressures automatically. Its hoses recoil to keep the work area clear.

What is the lifting capacity of the RX10KIS?
10,000 lbs. It comes with two 6,000 lb swing air jacks.

What wheelbase can the RX10KIS handle?
Up to 171 inches for general service, 166 inches for two-wheel alignment, and 158 inches for four-wheel alignment.

How wide are the runways?
24 inches, which accept vehicles up to 92 inches wide.

Does the RX10KIS work with Hunter alignment systems?
Yes. It works with Hunter alignment systems, including HawkEye Elite®, as part of Fully Integrated Alignment.

Is a harsh-duty option available?
Yes. Hunter's Harsh Duty package adds corrosion protection for areas with heavy road salt and brine. It is available only on IS and PS models.

What are the power and air requirements?
208–230 VAC single-phase power at 26 amps, and an air supply of 130–150 psi.

Where is the RX10KIS made?
Hunter scissor lifts are engineered in the United States and manufactured in Durant, Mississippi.

Equipment images are for reference only. Model shown may differ from current production and may include optional features. Contact your local rep or call us at 1-800-621-1563 to verify specifications and included accessories. Additional accessories are needed for this equipment.

Product Name Hunter RX10KIS 10,000 lb Surface-Mount Scissor Alignment Lift with Inflation Station
Brand Name Hunter Engineering Co.
Lookup # 255RX10KIS